Custom Ported Enclosure for 2 10" Subs with Plexiglass Window - 3.1 CF

THIS ENCLOSURE WILL BE BUILT FOR THE SPECIFIC SUBWOOFER YOU ARE INSTALLING. DIMENSIONS AND TUNING MAY VARY DEPENDING ON THE SUBWOOFERS YOU ARE INSTALLING. WE WILL CONFIRM ALL DETAILS BEFORE WE BUILD YOUR CUSTOM ENCLOSURE!!!

This listing is for a custom ported enclosure for two 10" Subs We use two 3" aeroports to reduce port noise so you get nothing but clean clear bass from your sub. Also, the sub is recessed 3/4" into the box. All the joints are glued and screwed together to insure that the box will hold up against the high output of the subwoofer for as long as you need it to.

Enclosure Details:

- 3/4" MDF Construction

- Plexiglass Window: 1/2" Thick - 18" x 7.5"

- Port Tubes - 3" x 11"

- Tuned to 32 hz. (adjustable by request)

- Black Carpet (charcoal carpet available by request

- Exterior Dimensions -

- 36" Length

- 13.25" Height

- 16" Depth

- 3.1 Cubic Ft

- Roughly 65 lbs

- 1 Terminal included

- Sealed air tight with liquid nails caulk